Home
>>
Shop By Brand
>>
AMT Pumps
AMT Pumps
-
-
- 300 Cast Iron Construction
- Mechanical Seal: Buna-N
- 1 1/2" and 2" NPT Port Sizes
- Self Primes to 20'
- ODP and TEFC, Sigle or 3 phase 56 frame motors
- 3 Horsepower
-
-
-
.jpg)
-
- Cast Iron Construction with Investment Cast 300 Series Stainless Steel Impellers
- Mechanical Seal: Buna-N
- 1-1/2" or 2" NPT Port Sizes
- ODP and TEFC single or 3 phase Motors
- Delivers up to 157 GPM and 71 PSI
-
-
-
-
- Cast Iron Construction with Investment Cast 300 Series Stainless Steel Impellers
- Mechanical Seal: Buna-N
- 1-1/2" or 2" NPT Port Sizes
- ODP and TEFC single or 3 phase Motors
- Delivers up to 157 GPM and 71 PSI
-
-
-
-
- Cast Iron Construction
- Mechanical Seals: Buna-N/Stainless Steel Viton
- Sized for 1 HP to 3 HP Driver Depending on Model
- Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings
- Delivers up to 120 GPM and 42 PSI
-
-
-
-
- UL Listed (E85176)
- Stainless Steel, Bronze and Cast Iron Construction
- Stainless Steel Floats and Shafts
- Carbon or Bronze Bearings
- 1-1/4", 1-1/2" and 2" NPT Discharge Port Sizes
-
-
-
-
- Stainless Steel
- Mechanical Seals: Viton
- Self-Priming up to 20'
- Delivers up to 120 GPM and 42 PSI
-
-
-
-
- 300 Cast Iron Construction
- Mechanical Seal: Buna-N
- 1 1/2" and 2" NPT Port Sizes
- Self Primes to 20'
- ODP and TEFC, Sigle or 3 phase 56 frame motors
- Available in 1/2 to 2 Horsepower
-
-
-
-
- Cast Bronze or Investment Cast 300 Series Stainless Steel Construction
- Mechanical Seal Options: Viton® or Teflon®
- 1-1/2" NPT Port Sizes
- Self-priming to 6 ft.
- TEFC Single or 3 phase 56 frame motors
-
-
-
-
- 300 Series Stainless Steel Construction
- Mechanical Seal: Viton
- 1 1/2" NPT Port Sizes
- Self Primes to 20'
- ODP and TEFC, Sigle or 3 phase 56 frame motors
- Available in 1/2 to 3 Horsepower
-
-
-
-
- Cast Iron w/Stainless Steel Motor Housing
- Hi Chromium Steel Impeller and Cover for Wear Resistance and Durability
- Superior Motor Design for Quiet, Low Noise Operation
- 2" NPT Port Sizes
-
-
-
.jpg)
-
- Cast Iron or Aluminum Construction
- Mechanical Seal Options: Buna-N Mechanical Seal and O-Ring
- Self-Priming up to 20 ft.
- Powered by B&S , Honda and Tecumseh engines
- Carry handle and steel base included
-
-
-
-
- Investment Cast 300 Series Stainless Steel Construction
- Mechanical Seal Option: Buna-N
- 1" NPT Port Sizes
- Self-priming to 6 ft.
- ODP and TEFC, Single or 3 phase 56 frame motors
-
-
-
.jpg)
-
- Cast Iron or Cast Aluminum Construction
- Mechanical Seal Options: Buna N or Viton®
- Self-Priming up to 20 ft.
- Engine powered by Briggs &Stratton, gas engine
- Delivers up to 85 GPM, and 155 PSI
-
-
-
-
- Cast Iron
- Mechanical Seal Options: Buna N
- Self-Priming up to 20 ft.
- Engine powered by Honda OHV Gas Engines
- Delivers up to 85 GPM, and 155 PSI
-
-
-
-
- Cast Iron or Aluminum Construction
- Mechanical Seal Options: Buna-N Mechanical Seal and O-Ring
- Self-Priming up to 20 ft.
- Powered by B&S , Honda and Tecumseh engines
- Carry handle and steel base included
-
-
-
-
- Cast Bronze Construction
- Mechanical Seal: Buna-N
- 3/4" NPT Port Sizes
- 1/12 horsepower motor
-
-
-
-
- Cast Aluminum Construction
- Mechanical Seal: Buna-N
- 1" NPT Port Sizes
- NEMA 56J ODP Motor
- 1/2 horsepower motor
- Delivers up to 39 GPM and 24 PSI
-
-
-
-
- Available in Investment Cast 300 Series Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller
- Mechanical Seal Options: Buna N, Viton® and Silicon Carbide
- TEFC 56J or JM Shaft Industrial Pump Duty Motors
-
-
-
-
- Bronze Construction
- Buna-N Mechanical Seals and O-Ring
- Totally Enclosed single phase Motor 115V AC
- 1/8 Horsepower
- Delivers up to 20 GPM and 5 PSI
-
-
-
-
- Bronze Construction
- Buna-N Mechanical Seals and O-Ring
- Totally Enclosed single phase Motors 12V DC
- 1/8 Horsepower
- Delivers up to 20 GPM and 5 PSI
-
-
-
-
- Available in Investment Cast 300 Series Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller
- Mechanical Seal Options: Buna N, Viton® and Silicon Carbide
- TEFC 56J or JM Shaft Industrial Pump Duty Motors
-
-
-
-
- Available in Investment Cast 300 Series Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller
- Mechanical Seal Options: Buna N, Viton®
- Available with TEFC 56J or JM Shaft Industrial Pump Duty Motors
-
-
-
.jpg)
-
- Cast Iron Construction
- Mechanical Seal: Buna-N
- Self Primes to 20'
- ODP and TEFC, Sigle or 3 phase 56 frame motors
- Available in 1 1/2 to 3 Horsepower
-
-
-
-
- Thermoplastic Construction
- Mechanical Seal: Buna N
- 2" NPT Port Sizes
- Self-Priming up to 20ft.
- Cast Iron Pedestal drive w/ sealed Ball Bearings
-
-
-
-
- Cast Aluminum
- Thermoplastic Rubber Diaphragm
- 2" NPT Port Sizes
- Self-Priming up to 20 ft.
- Available in 3.5 & 1.5HP motor
- Delivers up to 88 GPM, and 11 PSI
-
-
-
-
- Cast Iron Construction
- Silicon Carbide/Viton Mechanical Seal
- Self-Priming up to 20 ft.
- Totally Enclosed Fan Cooled (TEFC) Single and Three Phase Motors
- Delivers up to 540 GPM and 52 PSI
-
-
-
-
- Cast Iron Construction
- Mechanical Seal: Viton®/Silicon Carbide
- Self-Priming up to 20 ft.
- Engine powered by Yanmar
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Cast Iron Construction
- Silicon Carbide/Viton Mechanical Seal
- Self-Priming up to 20 ft.
- Totally Enclosed Fan Cooled (TEFC) Single and Three Phase Motors
- Delivers up to 540 GPM and 52 PSI
-
-
-
-
- Cast Iron or Die Cast Aluminum Construction
- Mechanical Seal Options: Viton/SIC
- Self-Priming up to 20 ft.
- Powered Honda gasoline engine
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Cast Iron Construction
- Mechanical Seals: Buna-N
- Self-Priming up to 20'
- Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings
- Delivers up to 120 GPM and 42 PSI
-
-
-
-
- Cast Iron Construction
- Mechanical Seal Options: Buna-N or Viton® Mechanical Seal and O-Ring
- Self-Priming up to 20 ft.
- Powered by B&S and Honda engines
- Carry handle included
-
-
-
.jpg)
-
- Heavy duty cast iron construction
- Mechanical Seal: Viton®, or Buna
- Self-Priming up to 20 ft.
- Powered by B&S, Honda and Yanmar engines
- Heavy duty steel roll frames included, wheel kits optional
-
-
-
-
- Stainless Steel Construction
- Mechanical Seal: Buna-N
- 2" NPT Port Sizes
- Self-Priming up to 20'
- Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings
-
-
-
-
- Cast Iron Construction
- Mechanical Seal: Buna N
- 2" NPT Port Sizes
- Self-Priming up to 20ft.
- Cast Iron Pedestal drive w/ sealed Ball Bearings
-
-
-
-
- 300 Series Stainless Steel Construction
- Mechanical Seal: Viton
- 2" NPT Port Sizes
- Self Primes to 20'
- ODP and TEFC, Sigle or 3 phase 56 frame motors
-
-
-
-
- Cast Iron or Thermoplastic Construction
- Mechanical Seal Options: Buna-N or Viton® Mechanical Seal and O-Ring
- Self-Priming up to 20 ft.
- Powered by B&S and Honda engines
- Carry handle included
-
-
-
-
- Available in Investment Cast 300 Series Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller
- Mechanical Seal Options: Buna N, Viton®
- Available with TEFC 56J or JM Shaft Industrial Pump Duty Motors
-
-
-
-
- Cast Aluminum
- Thermoplastic Rubber Diaphragm
- 3" NPT Port Sizes
- Self-Priming up to 20 ft.
- Engine Options: Briggs & Stratton, Honda, Hatz, or 115 VAC Weather Proof Electric Motor
-
-
-
-
- Cast Iron or Die Cast Aluminum Construction
- Mechanical Seal Options: Viton®/Silicon Carbide
- Self-Priming up to 20 ft.
- Engine powered by Yanmar, diesel Engines
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Heavy duty cast iron construction
- Mechanical Seal: Viton
- Self-Priming up to 20 ft.
- Engine powered by Honda
- Heavy duty steel roll frames included, wheel kits optional
-
-
-
-
- Heavy duty cast iron construction
- Mechanical Seal: Viton
- Self-Priming up to 20 ft.
- Engine powered by Yanmar
- Heavy duty steel roll frames included, wheel kits optional
-
-
-
-
- Heavy duty cast iron construction
- Mechanical Seal: Buna
- Self-Priming up to 20 ft.
- Engine powered by B&S
- Heavy duty steel roll frames included, wheel kits optional
-
-
-
-
- Heavy duty cast iron construction
- Mechanical Seal: Viton
- Self-Priming up to 20 ft.
- Engine powered by Honda
- Heavy duty steel roll frames included, wheel kits optional
-
-
-
-
- Die Cast Aluminum Construction
- Mechanical Seal Options: Viton®/Silicon Carbide
- Self-Priming up to 20 ft.
- Engine powered by Honda
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Die Cast Aluminum Construction
- Mechanical Seal Options: Viton®/Silicon Carbide
- Self-Priming up to 20 ft.
- Engine powered by Honda
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Die Cast Aluminum Construction
- Mechanical Seal Options: Viton®/Silicon Carbide
- Self-Priming up to 20 ft.
- Engine powered by Honda, gasoline engine
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Cast Iron or Die Cast Aluminum Construction
- Mechanical Seal Options: Viton®/Silicon Carbide
- Self-Priming up to 20 ft.
- Engine powered by Yanmar, diesel engine
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Cast Iron Construction with Bronze Impeller
- Mechanical Seal: Buna-N
- 3" NPT Suction and Discharge Ports
- Self-priming to 20 ft.
- TEFC, Single or 3 phase JM shaft motors
- Available in 3 to 7.5 Horsepower
-
-
-
-
- Cast Aluminum Construction with Cast Iron Wear Parts
- Mechanical Seal: Silicon Carbide
- 3" NPT Port Sizes
- Self-Priming up to 20ft.
- Cast Iron Pedestal drive w/ sealed Ball Bearings
-
-
-
-
- Cast Aluminum Construction with Cast Iron Wear Parts
- Mechanical Seal: Buna N
- 3" NPT Port Sizes
- Self-Priming up to 20ft.
- Cast Iron Pedestal drive w/ sealed Ball Bearings
-
-
-
-
- Die Cast Aluminum Construction
- Mechanical Seal Options: Viton®/Silicon Carbide
- Self-Priming up to 20 ft.
- Engine powered by Briggs &Stratton
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Die Cast Aluminum Construction
- Mechanical Seal Options: Viton®/Silicon Carbide
- Self-Priming up to 20 ft.
- Engine powered by Honda, gasoline engine
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Cast Iron or Die Cast Aluminum Construction
- Mechanical Seal Options: Viton®/Silicon Carbide
- Self-Priming up to 20 ft.
- Engine powered by Yanmar, diesel engine
- Delivers up to 540 GPM, and 44 PSI
-
-
-
-
- Cast Aluminum Casing and Adapter
- Mechanical Seal: Silicon Carbide
- Buna O-Rings and Flapper/Check Valve
- Powered by Honda Gas Engines, or Daihatsu Diesel Engines
- Solids handling to 3" diameter
-
-
-
-
- Cast Aluminum Casing and Adapter
- Seal: Viton/SIC
- Buna O-Rings and Flapper/Check Valve
- Powered by Honda Gas Engines, or Daihatsu Vanguard Diesel Engines
- Solids handling to 3" diameter
-
-
-
-
- Available in Investment Cast 300 Series Stainless Steel, Cast Bronze and Cast Iron with Stainless Steel Impeller
- Mechanical Seal Options: Buna N, Viton® and Silicon Carbide
- TEFC 56J or JM Shaft Industrial Pump Duty Motors
-
-
-
-
- Cast Bronze Construction
- Brass Column and Impeller Shaft
- Bronze Self-cleaning Open Impeller
- Available with 115V AC Single Phase or 230V AC Three Phase Motors,1590 RPM
- 3/8" NPT Discharge Port
-
-
-
-
- 1/8 to 1 HP Totally Enclosed Motors (TEFC)
- Single or Three Phase Motors
- Stainless Steel or Composite Semi-open Impeller Options
- Immersion and Suction Types
- Cast Iron Construction
-
-
-
-
- Cast Iron Construction with Carbon Vanes & Steel Components
- Buna-N Seal & Fiber Gasket
- 5 GPM @ 70 RPM (10 0z/Stroke)
-
-
-
-
- 1/8 to 1 HP Totally Enclosed Motors (TEFC)
- Single or Three Phase Motors
- Stainless Steel or Composite Semi-open Impeller Options
- Immersion and Suction Types
- Cast Iron Construction
-
-
-
-
- Cast Iron Casing and Column
- 3/4" to 1-1/2" NPT Discharge Port Sizes
- Handles Viscosities to 500 SSU
- 1/8 to 3/4 HP Totally Enclosed Fan Cooled (TEFC) Single or 3 phase Motor, 1725 RPM
- Deliver up to 67 GPM and 44 PSI
-
-
-
-
- Cast Aluminum Construction with Cast Iron and Steel Components
- Buna-N Seals and Fiber Gaskets
- Maximum Temperature 160°F
- Suction Strainer Included
- 16 GPM @ 70 RPM (29 Oz/Stroke)
-
-
-
-
- Cast Iron Construction with Carbon Vanes & Steel Components
- Buna-N Seal & Fiber Gasket
- Maximum Temperature 160°F
- 8 GPM @ 70 RPM (14 0z/Stroke)
-
-
-
-
- Polypropylene Construction with Stainless Steel Components
- Viton© and Nitrile/Cork Seals and Teflon© Piston Ring
- Maximum Temperature 130°
- 22 oz. Per Stroke
- 3/4" NPT Discharge Port
-
-
-
-
- Investment Cast 316 Stainless Steel Construction with Carbon Vanes
- Teflon© Lip Seal
- Maximum Temperature 200°F
- 5 GPM @ 70 RPM (10 Oz/Stroke)
- 1" NPT x 40" Stainless Steel Suction Tube Assembly
-
-
-
-
- Cast Iron w/Stainless Steel Motor Housing
- Hi Chromium Steel Impeller and Cover for Wear Resistance and Durability
- Superior Motor Design for Quiet, Low Noise Operation
- 2" TO 4" NPT Port Sizes
-
-
-
-
- Cast Iron Construction with Cast Stainless Steel Impeller
- Stainless Steel Pump Shaft
- Handles Viscosities up to 100 SSU
- Includes Heavy Duty Universal Mounting Plates
- 3 HP to 10 HP Motors Available
-
-
-
-
- Cast Bronze
- Mechanical Seal: Viton®
- 3/4" to 1-1/2" NPT Suction Ports
- 1/2" to 1-1/4" NPT Discharge Ports
- Delivers up to 118 GPM and 65 PSI
-
-
-
-
- Cast Bronze available with either Stainless Steel or Bronze Impeller
- Mechanical Seal Options: Viton®
- Totally Enclosed Fan Cooled(TEFC) 56J Motors
- 1/3 HP to 2 HP Single and Three Phase, 3450 RPM Motors
-
-
-
-
- Cast Iron Construction
- Mechanical Seal Buna-N
- 3/4" to 1-1/2" NPT Suction Ports
- 1/2" to 1-1/4" NPT Discharge Ports
- Delivers up to 118 GPM and 65 PSI
-
-
-
-
- Cast Iron with Stainless Steel Impeller
- Mechanical Seal Options: Buna-N, Viton® and Silicon Carbide
- Totally Enclosed Fan Cooled(TEFC) 56J Motors
- 1/3 HP to 2 HP Single and Three Phase, 3450 RPM Motors
-
-
-
-
- Cast Aluminum Construction
- Buna-N Mechanical Seal and O-Ring
- 1-1/4" NPT Suction and Discharge Port
- Self-cleaning, Semi-open Impeller
-
-
-
-
- Cast Bronze Stainless Steel Impeller
- Mechanical Seal Option: Viton/SS
- 1/2" to 1-1/4" NPT Port sizes, Discharge Port Rotates in 90° Increments
- 1/3 HP to 2 HP Single and Three Phase, 3450 RPM Motors
-
-
-
-
- Cast Bronze
- Mechanical Seal: Viton®
- 3/4" to 1-1/2" NPT Suction Ports
- 1/2" to 1-1/4" NPT Discharge Ports rotate in 90° increments
- Delivers up to 118 GPM and 65 PSI
-
-
-
-
- Cast Iron with Stainless Steel Impeller
- Mechanical Seal Buna-N
- Available with ODP or TEFC Motors
- 1/2 HP to 3 HP Single and Three Phase 3450 RPM Motors
- Delivers up to 118 GPM and 65 PSI
-
-
-
-
- Stainless Steel Construction With Investment Cast Stainless Steel Impeller
- Viton® Mechanical Seal and O-Ring
- Discharge Port Rotates in 90° Increments
- Available with Totally Enclosed Fan Cooled (TEFC) Motors
-
-
-
-
- Available in: Investment Cast Stainless Steel
- Mechanical Seal: Viton®
- 3/4" to 1-1/2" NPT Suction Ports
- 1/2" to 1-1/4" NPT Discharge Ports rotate in 90° increments
- Delivers up to 118 GPM and 65 PSI
-
-
-
-
- Investment Cast 300 Series Stainless Steel
- 1" to 1-1/2" NPT Port Sizes, Discharge Port Rotates in 90° Increments
- 1/2 HP to 3 HP Single and Three Phase 3450 RPM Motors
- Delivers up to 118 GPM and 65 PSI
-
-
-
-
- Stainless Steel Construction W/ Investment Cast Stainless Steel Impeller
- Viton® Mechanical Seal and O-Ring
- Available with Totally Enclosed Fan Cooled (TEFC) Motors
-
-
-
-
- Stainless Steel and Cast Iron Construction
- Built-in Thermal Protection
- Automotic Float Switch Included
- 2" NPT Port Sizes
- Delivers up to 95 GPM and 20 PSI
-
-
-
-
- Cast Iron Construction
- Mechanical Seal: Buna-N
- Self-Priming up to 20'
- ODP and TEFC, Single or 3 phase 56 frame motors
- available in 1/3 to 1 1/2 Horsepower
- Delivers up to 82 GPM and 30 PSI
-
-
-
-
- Plastic Construction
- Built-in Thermal Protection
- Triplex Seal System; Double Mechanical Seals Plus Shaft Seal
- Automotic Float Switch Included
- Clog Resistant Impellers
-
-
-
-
- Stainless Steel with a Stainless Steel Impeller
- Seal: Viton
- Totally Enclosed Fan Cooled(TEFC) 56J Motors
- 1/3 HP to 2 HP Single and Three Phase, 3450 RPM Motors
- Delivers up to 90 GPM and 28 PSI
-
-
-
-
- This 2" commercial duty water pump.
- Able to pass solids up to 1/2" thick, this self-priming pump is portable and lightweight, and is designed for use with nonflammable liquids compatible with pump component materials.
-
-
Price: $485.00
-
Sale Price: $412.25
-
-
-
- This 3" commercial duty water pump.
- Able to pass solids up to 1/2" thick, this self-priming pump is portable and lightweight, and is designed for use with nonflammable liquids compatible with pump component materials.
-
-
Price: $585.00
-
Sale Price: $497.25
-
