Liquid Controls M-7-CLI-2 Flow Meter w/ LCR-II, Class 2

Liquid Controls M-Series meters meet NTEP (NIST Handbook 44) and International Weights and Measures accuracy requirements as well as U.S. Military specifications.

Liquid Controls M-Series rotary motion positive displacement (PD) meters offer the ultimate in measurement accuracy for custody transfer of petroleum products, aviation fuels, LPG, and a broad range of industrial liquids. LC meters incorporate a unique design, presenting minimal intrusion in a flowing stream of liquid, as well as minimal pressure drop through the meter. The LC meter consists of a housing in which three synchronized rotors turn with no metal-to-metal contact. Hydraulic sealing is accomplished by a stationary boundary layer of liquid, not by the wiping action of mechanical parts

• Low pressure drop—will operate on gravity flow or pump pressure.
• Sustained accuracy—no wear from metal-to-metal contact inside the measuring chamber means minimal deterioration in accuracy over time, fewer recalibrations, and longer service life. Meters conform to NIST and International Weights and Measures accuracy requirements.
• Wide temperature range—products can be metered accurately from -40° F (-40° C) to 160° F (71°C).
• Wide viscosity range—LC meters can accurately meter products from less than 30 SSU (less than 1 centipoise) to 1,500,000 SSU (325,000 centipoise).
• Maximum adaptability—right angle design with choice of stock or custom elbows/ fittings provides unequaled mounting flexibility to meet your installation requirements.
• Rated to 150psi / 10.5 BAR.

Meter and rotors:
Cast aluminum (other metalurgies available including cast iron and stainless steel)

Internal components:
Aluminum, Ni-Resist, stainless steel, iron

Seal materials:
Buna-N, Viton®, PTFE

Bearings:
Carbon, PTFE, Ni-Resist